BUTTERFLY VALVES
800 SERIES BUTTERFLY VALVES
The 800 series valve body is manufactured from Durcor®, PureFlex proprietary advanced fiber reinforced composite. Durcor® reinforcing fibers are long and interlocked; this interlocked reinforcement system transfers loads throughout the fiber matrix making the 800 series valve body virtually indestructible. It has tensile and compressive strengths that rival steel along with outstanding impact resistance that is unmatched in the industry. The strength of Durcor® enables the 800 series valve to maintain ANSI face to face dimensions, be direct threaded for lug design and allows it to be installed in any type of piping system without the need for special considerations. Durcor® excels in temperatures from -60°F to +250°F and has only .001” of thermal expansions across its full temperature range.
890 SERIES BUTTERFLY VALVES
PureFlex Series 890 Butterfly Valve bodies are manufactured from Derakane 411/470 vinyl ester reinforced with ECR glass fiber in a proprietary process developed by PureFlex providing outstanding corrosion resistance to thousands of media. The Lug and Full-Face 890 valves offer full flange support in FRP and light gauge metal piping systems.
CHEMTITE® BUTTERFLY VALVE
- Bubble-Tight Design - Heavy Duty PTFE/PFA Liner Resists Cracking - Two Seat Options: PTFE or UHMWPE - Size Range: 2” to 12” - Pressure Rating: Full Vacuum to 150 psi (10.34 bar) - Operating Temperature: (-)20°F to (+)400°F - One Piece Disc & Stem - Mounting Flange is ISO 5211 Compliant - Five Disc Options: • PFA / CD4MCu • 316 Stainless Steel • Hastelloy® C276 • Titanium Gr. C-2 • UHMWPE / CD4MCu - Resistant To: • All acids • All solvents • All bleach solutions • All phenols • All caustics • All peroxides • All organic and inorganic chlorides & sulfates
700 SERIES BUTTERFLY VALVE
Valve body is manufactured from advanced fiber reinforced vinyl ester resin that is as strong as steel, 1/2 the weight of ductile iron and will never corrode. Disc & stem are one piece casting available in stainless steel or food grade EPDM or Hypalon encapsulated nickel plated DCI with double "D" shaft drive. Energized triple stem seals top & bottom for leak free service.
710 SERIES BUTTERFLY VALVE PTFE
710 Series PTFE-Lined Butterfly Valve:
Mixture of high strength, specially formulated, compression molded glass fiber and vinly ester thermoset resin body.
Disc: PFA-Lined, 316ss, Gr.C-2 Titanium
Seat: PTFE/Silicone or PTFE/Viton
Flange Connections: Wafer or Lug
2”-12” / -50°F to +275°F
710 SERIES BUTTERFLY VALVE UHMWPE
710 Series UHMWPE-Lined Butterfly Valve:
Mixture of high strength, specially formulated, compression molded glass fiber and vinly ester thermoset resin body.
Disc: UHMWPE-Lined, CD4M Cu.
Seat: UHMWPE/Silicone Energizer
Flange Connections: Wafer or Lug
2”-12” / -50°F to +200°F
DOUBLE-OFFSET HD BUTTERFLY VALVES
300HD Double-Offset High-Performance Butterfly Valve:
Graphite Reinforced Vinyl Ester
310HD Double-Offset High-Performance Butterfly Valve:
Fiberglass Reinforced Vinyl Ester
Flange Connections: Wafer or Lug
3”-12” / 0°F to +250°F
310HD Double-Offset Heavy Duty Butterfly Valve:
Glass Reinforced Vinyl Ester
Flange Connections: Wafer or Lug
14” - 48” / -50° to +250°F
BALL VALVES
400 SERIES BALL VALVE
The 400 series valve is manufactured from advanced premium Derakane® 470 vinyl ester resin reinforced with glass fibers. It is highly corrosion resistant and is suitable for many chemicals from -50ºF to +215ºF up to 275 psi. Size range 1" - 10".
405 SERIES BALL VALVE
The 405 series valve is manufactured from advanced premium Derakane® 470 vinyl ester resin reinforced with carbon graphite fibers. It is highly corrosion resistant and is suitable for many chemicals from -50ºF to +250ºF up to 275 psi. Valve is static dissipative, having less than 10³ ohms cm sustain resistivity.
450 SERIES BALL VALVE
The 450 series valve is manufactured from advanced E-Plus™ epoxy resin reinforced with glass fibers. It has outstanding corrosion resistance to solvents and is suitable for many chemicals from -50ºF to +225ºF up to 275 psi. Size range 1" - 10".
455 SERIES BALL VALVE
The 455 series valve is manufactured from advanced E-Plus™ epoxy resin reinforced with carbon graphite fibers. It has outstanding corrosion resistance to solvents and is suitable for many chemicals from -50°F to +275°F up to 275 psi. Size range 1" - 10". Valve is static dissipative, having less than 10³ ohms cm sustain resistivity.
459 SERIES CERAMIC LINED
The valve body is manufactured from strong, light weight advanced premium E-Plus™ epoxy resin reinforced with carbon graphite. The ceramic liner / seats and ball are partially stabilized zirconia (PSZ) which provides unmatched impact resistance. The valve is able to withstand abrasion, cavitation, wear, thermal cycling, and severe corrosive media and environments up to 275°F. The 459 Series ball valve exceeds Class IV shut-off and its stem seal will meet your routine or most rigid service requirements.
CHEMTITE® BALL VALVE
-
Bubble-Tight Design
-
Heavy Duty PFA Liner Resists Cracking
-
Dovetail Locking Grooves for PFA Retention
-
Size Range: 1" to 6" (Full Standard Port Design)
-
Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
-
Operating Temperature: (-)20°F to (+)400°F
-
Separate Ball and Stem Reduces Packing Side Loading
-
Anti-Blowout Stem
-
Cavity Filled Space Around Ball
-
ASME B16.10 with ISO 5211 Mounting Pad
-
Lockable Handle and Static Ground Spring (standard)
-
Resistant To
-
all acids
-
all solvents
-
all bleach solutions
-
all phenols
-
all caustics
-
all peroxides
-
all organic and inorganic chlorides & sulfates
310 SERIES BALL VALVE
Mixture of high strength, specially formulated, compression molded glass fiber and vinly ester thermoset resin.
1”-10” / -50°F to +250°F
Pressures to 275 psig
300 SERIES BALL VALVE
Graphite fiber and Vinyl Ester Resin provide high strength and chemical inertness. Compression molded.
1”-10” / -50°F to +250°F
Pressures to 275 psig
410 SERIES BALL VALVE
Polysulfone Resin / “Glass Fiber” reinforced disigned for caustic and sodium hypochlorite solutions. FDA approved.
1”-4” / -50°F to +250°F
Pressures to 275 psig
410 THREADED SERIES BALL VALVE
Polysulfone Resin / “Glass Fiber” reinforced disigned for caustic and sodium hypochlorite solutions. FDA approved.
1/2”-2” / -50°F to +250°F
Pressures to 275 psig
610XP SERIES BALL VALVE
Novolac Epoxy / “Glass Fiber” reinforced.
Compression molded novolac epoxy resin optimizes both chemical resistance and mechanical capabilities.
1”-10” / -50°F to +300°F
Pressures to 275 psig
500XP SERIES BALL VALVE
Novolac Epoxy / “Graphite Fiber” reinforced.
Compression molded novolac epoxy resin optimizes both chemical resistance and grounding capabilities.
1”-10” / -50°F to +300°F
Pressures to 275 psig
300 ZIRCONIA CERAMIC OR UHMWPE BALL VALVE
Lined Ball Valve:
Zirconia ceramic and graphite fiber reinforced vinyl ester to provide abrasion and chemical resistance. UHMWPE lined w/ ceramic ball has excellen erosion resistance.
1”-10”
Ceramic: -50°F - 300°F
UHMWPE: -50°F - 180°F
Pressures to 200 psig
8" WAFER BALL VALVE
Vinyl Ester or Epoxy / “Glass or Graphite Reinforced.
Available in 300 Series Vinyl Ester or 510XP & 610XP Epoxy.
-50°F to +300°F
Pressures to 150 psig
POLY-GAS BALL VALVE
1/2" - 12"
POLY-CHEM BALL VALVE
1/2" - 12"
POLY-WATER BALL VALVE
1/2" - 12"
3-WAY BALL VALVE
Vinyl Ester and Graphite Reinforced.
Two ball configurations, T-port and L-port, permit a variety of flow schemes.
1-1/2”
-50°F to +250°F
Pressures to 150 psig
PLUG VALVES
CHEMTITE® PLUG VALVE
-
Bubble-Tight Design
-
*One-Piece Heavy-Duty TFM Liner (.5", .75" PFA Lined)
-
PFA/DCi Plug
-
PFA Reverse Lip Diaphragm
-
In-Line Adjustability
-
One-Piece A395 DCi Body
-
ASME B16.10 with ISO 5211 Mounting Pad and Flange Mounting Pad
-
Lockable Handle and Static Ground Spring (standard)
-
Size Range: .5" to 8"
-
Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
-
Operating Temperature: (-)20°F to (+)400°F
-
Resistant To
-
all acids
-
all solvents
-
all bleach solutions
-
all phenols
-
all caustics
-
all peroxides
-
all organic and inorganic chlorides & sulfates
BALL CHECK VALVES
CHEMTITE® BALL CHECK VALVE
-
Bubble-Tight Design
-
Heavy Duty PFA Liner Resists Cracking
-
Dovetail Locking Grooves for PFA Retention
-
Size Range: 1" to 6" (Full Standard Port Design)
-
Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
-
Operating Temperature: (-)20°F to (+)400°F
-
Separate Ball and Stem Reduces Packing Side Loading
-
Anti-Blowout Stem
-
Cavity Filled Space Around Ball
-
ASME B16.10 with ISO 5211 Mounting Pad
-
Lockable Handle and Static Ground Spring (standard)
-
Resistant To
-
all acids
-
all solvents
-
all bleach solutions
-
all phenols
-
all caustics
-
all peroxides
-
all organic and inorganic chlorides & sulfates
NIL-COR® BALL CHECK VALVE
​Available in: 300 Graphite/Vinyl Ester; 310 Glass/Vinyl Ester; 410 Glass/polysulfone; 500XP Graphite/Epoxy; 610XP Glass/EpoxyBall Materials: PTFE, PolypropyleneSeat Materials: FKM Fluoroelastomer
Flange Connections: 150# ANSI 1”-6”
100 SERIES BALL CHECK VALVE
​One piece massive valve body is light weight, rugged and is corrosion resistant on the outside as it is on the inside to resist environmental attack. Available in fiberglass or carbon graphite reinforced vinyl ester or E-Plus™ epoxy materials. The valve body meets ANSI B16.10 and flange connections are compliant to ASME B16.5 Class 150. Other flange drilling options are available.
CHEMTITE® 45° BALL CHECK VALVE
-
Bubble-Tight Design
-
Heavy Duty PFA Liner Resists Cracking
-
Size Range: 1" to 6"
-
Pressure Rating: Full Vacuum to 250 psi (17.23 bar)
-
UV Resistant Epoxy Coating
-
Eliminates & Prevents
-
Back-Flow of liquids in Pipelines
-
Pump Impeller Rotation in Opposite Direction
-
Siphoning of Pumps
-
Allows for both Horizontal and Vertical Installation
-
Operating Temperature: (-)20°F to (+)400°F
-
Mounting Flange is ISO 5211 Compliant
-
​
SWING CHECK VALVES
200 SERIES SWING CHECK VALVES
Swing Check Valves for corrosive chemical service used in construction of pressurized piping systems.Temperature rating from 0° F to 250° F.
WAFER SWING CHECK VALVES
Available in:
300 Graphite/Vinyl Ester; 310 Glass/Vinyl Ester;
500XP Graphite/Epoxy; 610XP Glass/Epoxy
Flapper Materials: 300 Graphite/Vinyl Ester; 310 Glass/Vinyl Ester;
500XP Graphite/Epoxy; 610XP Glass/Epoxy
Seat Materials: FKM Fluoroelastomer
Flange Connections: 150# ANSI
3”-12”
DIAPHRAGM VALVES
DIAPHRAGM VALVES
The valves are designed to handle a wide range of fluids and gases including highly corrosive toxic chemicals and abrasive slurries.
Available in a wide variety of materials and options, in sizes 1/2" to 12", with a temperature range of (-)60°F to (+)350°F at pressures to 200 psig.
AUTOMATED / CONTROL VALVES
