MAGNETIC "MAG" DRIVE PUMPS

Logo_Magnatex.png
MAXP_PUMP_PIC.png
MPL_MHL_MLL_PUMP_PIC.png
MEP_PUMP_PIC.png
MMP_MMH_MML_PUMP_PIC.png
MP_MPH_ML_PUMP_PIC.png
MTA_PUMP_PIC.png
ME_PUMP_PIC.png
MPT_PUMP_PIC.png

CHEMSTEEL SERIES GEAR PUMP MAG DRIVE

CHEMSTEEL_PUMP_PIC.png
 
MAXP_PUMP_PIC.png

Magnatex MAXP pumps have the following design features:

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs

  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required

  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary

  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment

  • Special high-temperature construction is available to handle up to 800°F

  • Options for leak detection are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals

Materials of Construction

  • 304 SS

  • 316 SS

  • Duplex Stainless Steel

  • Alloy 20

  • Alloy B&C

 

Magnetic Drive Pumps

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Optional SiC-X bearing system for enhanced dry running capability

  • Straddle-mounted, double bearing design reduces shaft load and bearing wear when compared to our competitors' typical cantilevered, overhung designs

  • Slip-fit construction allows easy maintenance and on-site repairs with no special tools required

  • Close-coupled configuration eliminates coupling and motor alignment issues

  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment

  • Optional high temperature construction to handle up to 660°F

  • Optional baffled rear casing design for enhanced solids handling

  • Large internal flow path handles solids: 1% at 500µ; 8% at 100µ

Materials of Construction

  • 316SS

  • 304SS

  • Alloy 20

  • Alloy B&C

 

  • Optional high-pressure models for suction conditions to 5,000 psi and more

MPL_MHL_MLL_PUMP_PIC.png

Materials of Construction

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Standard SiC-X bearing system for enhanced dry running capability

  • Straddle-mounted, double bearing design reduces shaft load and bearing wear when compared to our competitors typical cantilevered, overhung designs

  • Slip-fit construction allows easy maintenance and on-site repairs with no special tools required

  • Large internal flow path handles solids: 1% at 500µ 5% at 100µ.

  • Close-coupled configuration eliminates coupling and motor alignment issues.

  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment

  • Optional high-temperature construction to handle up to 660°F without cooling liquid

Materials of Construction

  • 316SS

  • Alloy 20

  • Alloy B&C

 

  • Optional high-pressure models for suction conditions to 5,000 psi and more

MP_MPH_ML_PUMP_PIC.png
 

Magnatex ME Series

 

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs

  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required

  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary

  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment

  • Special high-temperature construction is available to handle up to 800°F

  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals

 

Materials of Construction

  • ETFE Lined

  • PVDF Lined

Registered trademark of Arkema, Inc.

ME_PUMP_PIC.png
 
  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs

  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required

  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary

  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment

  • Special high-temperature construction is available to handle up to 800°F

  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals

 

Materials of Construction

  • GF Polypropylene

MEP_PUMP_PIC.png
 
  • The MMP Series pumps are high-quality, dependable, long-lasting pumps utilizing our exclusive straddle bearing design and furnished with the shaft, thrust ring and bushing made of sintered silicon carbide material. Sealless pumps help eliminate "Reportable Release" issues.

  • All Magnatex pumps and spare parts come with a 1-year unconditional warranty on materials and workmanship.

  •  

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs

  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required

  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary

  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment

  • Special high-temperature construction is available to handle up to 800°F

  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals

  •  

  • Materials of Construction

  • 316 SS

  • Ceramic or Stainless Steel Shaft Option

  • Optional high-pressure models for suction conditions to 2,500 psi and more

MMP_MMH_MML_PUMP_PIC.png
 
MTA_PUMP_PIC.png
  • Transfer-compression molding allows positive, interlocking casing linings 5-6 mm thick that stay in place; ideal for vacuum and higher temperature applications.

  •  

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Straddle-mounted inner magnet system with bearings on both sides of the magnet - this design reduces shaft and bearing loads when compared to our competitors overhung, cantilevered, inner magnet designs

  • Slip-fit construction, which allows easy on-site maintenance with no special tools or fixtures required

  • Large internal flow paths, which means the pumps can easily handle 1% solids @ 500µ and up to 8% solids @ 100µ. Optional baffle-plated rear casing enables enhanced solids handling capability. Optional proprietary self-cleaning strainer technology enables us to handle even higher solids percentages if necessary

  • Safely handles toxic, noxious, corrosive or high-temperature liquids with increased safety to personnel and the environment

  • Special high-temperature construction is available to handle up to 800°F

  • Several dual containment systems are available that virtually eliminate any leakage to the environment when handling extremely hazardous chemicals

  •  

  • Materials of Construction

  • PFA Lined

 
MPT_PUMP_PIC.png
  • MPT Series Pumps

  • Magnetic Drive Pumps

  • Mag drive sealless pumps eliminate the need for expensive mechanical seals; eliminating costly shutdowns and repairs, which helps reduce "Reportable Release" issues.

  • No maintenance intensive mechanical seals required. No seal flush or complex and expensive seal pot systems to monitor or maintain.

  • Standard SiC-X bearing system for enhanced dry running capability

  • Straddle-mounted, inner magnet system, with bearings on both sides of the magnet, which reduces shaft and bearing loads when compared to our competitors' overhung, cantilevered inner magnet designs

  • Slip-fit construction that allows easy on-site maintenance, with no special tools or fixtures required

  • Close coupled configuration eliminates coupling and motor alignment issues

  • Handles toxic, noxious and corrosive liquids for leak-free pumping with increased safety to plant personnel and the environment

  • Excellent for pumping entrained gases

  • Excellent for low NPSH applications

  • Materials of Construction

  • 316 SS