INTERNAL GEAR PUMPS

PROGRESSIVE CAVITY PUMPS

 

VV40 INTERNAL GEAR PUMP

VV40 / Internal Gear Pump

Features

  • High Viscosity Fluid Capabilities

  • High Abrasives Handling Ability

  • Capacities to 470 GPM

  • Pressures to 200 PSI

  • Temperatures -60°F to 800°F

  • External End Clearance Adjustment

  • Self-Priming

  • Available Packed or Mechanically sealed

  • Interchangeable Parts between Specific Sizes

Applications

Water, Chemical, Oil, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives

Optional Features

  • Available without Safety Relief Valve

  • Multiple Sealing Options

    • Packed

    • Component Mechanical Seal

    • Cartridge Mechanical Seal

  • Adaptability for Different Configurations

 

VV95 INTERNAL GEAR PUMP

VV95 / Internal Gear Pump

Features

  • High Viscosity Fluid Capabilities

  • Ability to Operate at Higher Speeds

  • Capacities to 115 GPM

  • Pressures to 250 PSI

  • Temperatures -40°F to 350°F

  • External End Clearance Adjustment

  • Self-Priming

  • Mechanically sealed Behind Rotor, Isolating Bearings from Fluid

  • Interchangeable Parts between Specific Sizes

  • 180 Degree NPT Suction and Discharge Ports

  • Integrated Gauge Ports

Applications

Water, Chemical, Oil & Fuel, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives

Optional Features

  • Available with or without Safety Relief Valve

  • Adaptability for Different Configurations

 

VV75 INTERNAL GEAR PUMP

VV75 / Internal Gear Pump

Features

  • Compact Design is Simple to Mount

  • Reduces Extensive Alignment Time

  • Minimal Moving Parts

  • High Viscosity Fluid Capabilities

  • High Abrasives Handling Ability

  • Capacities to 30 GPM

  • Pressures to 100 PSI

  • Temperatures -60°F to 225°F

  • Self-Priming

  • Available with lip or mechanical seal

  • Interchangeable Parts between Specific Sizes

Applications

Water, Chemical, Oil, High Abrasive, Paint, Pulp and Paper, Resins/Adhesives

Optional Features

  • Adjustable Safety Valve Settings (50 PSI standard)

  • Available without Safety Relief Valve

  • Multiple Sealing Options

    • Lip Seal

    • Component Mechanical Seal

  • Adaptability for Different Configurations

 

SPPC SPL PIN JOINT

SPPC SPL Pin Joint / Pin Driven Pump

Features

  • Open Pin Joint

  • Designed for Easy Maintenance

  • Non-Pulsating Flow

  • Low Vibration

  • High Efficiency

  • Viscosites Exceeding 1 Million Centipoise

Applications

Grout, Asphalt, Lubricants, Pulp & Paper, Crude Oil, Soaps & Detergents, Clays, Drilling Muds

Optional Features

  • Water Flush Packing

  •  Large Selection of Drive End Options

 

SPPC GEAR JOINT

SPPC Gear Joint / Sealed Gear Joint Pump

Features

  • Sealed Gear Universal Joint

  • Exceptional Abrasion Resistance

  • Modular Design

  • Ability to Rotate the Suction Housing

  • Simple Design: Minimal Parts

Applications

  • Municipal Sludge

  • Raw Sewage

  • Adhesives

  • Starch

  • Crude Oil

  • Plaster

  • Resins

  • Hazardous Wastes

  • Paint

Optional Features

  • Water Flush Packing

  • Deflector near Rotor Head

  • Shaft Sleeves

  • Large Selection of Drive Ends

 

SPPC WOBBLE / SWP & SWPM

SPPC Wobble / SWP & SWPM

Features

  • Multiple Material Options

  • Simple and Compact

  • High Solids Pumping Ability

  • Self-Priming: Suction Lifts to 26 Feet

  • Smooth Continuous Operation

  • Quiet Operation

  • Rotors & stators SWP15, SWP22, SWP33 & SWP44 are interchangeable, along with SWPM rotors & stators

Applications

Water, Abrasives, Waster & Water Treatment, Oils and Lubricants, Polymers, Bilge Pump, Mobile Friendly Applications, Chemical Slurries, Irrigation, Limestone Slurries, Paint