SUBMERSIBLE PUMPS

SOLIDS_HANDLING_PUMPS_LOGO.png
DEWATERING_PUMPS_LOGO.png
Logo_Stancor.png
SPECIALTY_MATERIALS_PUMPS_LOGO.png

SOLIDS HANDLING SUBMERSIBLE PUMPS

 

Solids Handling

Pumping liquids is not the only job of a pump.  In many applications, the pump must also deal with a variety of solids – from diapers and wipes in sewage to a wide range of debris (commonly referred to as “trash”) in slurries – to reach its specified service life.  Stancor™ offers a number of pump models to help our customers balance cost efficiency and performance when dealing with a mixture of solids and liquids.  This portfolio of pumps can handle solids as large as 3 inches while maintaining key performance specifications.

AHS_SERIES_PUMP_LOGO.png
AHS-SERIES
Wastewater pump featuring an abrasion‐ resistant impeller, die cast aluminum body and a high efficiency, high torque motor.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
LX_SERIES_PUMP_LOGO.png
LX-SERIES
Sewage pump with a non‐clogging impeller, double mechanical seals and robust construction.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SEW_SERIES_PUMP_LOGO.png
SEW-SERIES
Features a recess vortex impeller made from cast iron to be a heavy‐duty pump that can pass 2‐inch solids.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SG_SERIES_PUMP_LOGO.png
SG-SERIES
High chrome steel impeller and shredding ring offers superior heat dissipation for wastewater treatment and sewage.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SKR_SERIES_PUMP_LOGO.png
SKR-SERIES
Slurry pump designed for heavily contaminated liquids that features hardened alloy wet‐end materials.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SL_SERIES_PUMP_LOGO.png
SL-SERIES
Low suction pump designed for continuous duty handling the rigors of residual water.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SB_SERIES_PUMP_LOGO.png
SC_SERIES_PUMP_LOGO.png
SE_SV_SERIES_PUMP_LOGO.png
SB-SERIES
Designed for long service life in discharge water and pump applications due to non‐ clogging impeller design and sealing.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SC-SERIES
Includes impeller with a tungsten cutter edge for solids in wastewater treatment and ground drainage applications.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SV/SE-SERIES
Offers large impeller clearance to serve as a reliable, affordable pump for a variety of wastewater and sumps.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
 

DEWATERING SUBMERSIBLE PUMPS

DEWATERING

Removing water from construction and mining sites can be demanding.  Stancor™ manufactures a broad line of MSHA approved explosion-proof pumps to handle the rigors of difficult operating environments.  Pumps are constructed from light weight alloys, including extensive use of stainless steel components for longer life.  Rubber clad diffusors are utilized to extend life and maintain efficiency by making field adjustments easy.  Stancor™ also provides the longest cable lengths in the industry and MSHA-approved controls to further maximize service life.  Dewatering pumps are available in 115, 230, 460, 575 and 950 volts and are made in the USA.

TRASH_PUMPS_LOGO.png
STANDARD_DEWATERING_PUMPS_LOGO.png
DEWATERING_CSA_PUMPS_LOGO.png
TRASH_CSA_PUMPS_LOGO.png
STANDARD DEWATERING PUMPS
Maximum efficiency pump, as defined by GPM and HP, to offer a strong ROI in any application.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
STANDARD TRASH PUMPS
Designed to efficiently manage large solids (trash) while pumping liquids.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
CSA-APPROVED DEWATERING PUMPS
Maximum efficiency pump, as defined by GPM and HP, to offer a strong ROI in any application.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
CSA-APPROVED TRASH PUMPS
Designed to efficiently manage large solids (trash) while pumping liquids.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
STANDARD_DEWATERING_PUMPS_LOGO.png
MSHA-APPROVED MINE DEWATERING PUMPS
Designed with robust materials, and to be explosion proof, for difficult operating environments.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
TRASH_PUMPS_LOGO.png
WELL_CASING_PUMPS_LOGO.png
MSHA-APPROVED MINE TRASH PUMPS
Designed with robust materials, and to be explosion proof, for difficult operating environments
 
CLICK HERE FOR MODELS & TECHNICAL INFORMATION.
WELL CASING PUMPS
Slim line, for 8-inch and 12-inch casings, that excel in narrow applications with abrasive environments.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION

SPECIALTY MATERIALS SUBMERSIBLE PUMPS

 

SPECIALTY MATERIALS

Some applications present unique challenges.  Stancor™ offers pumps in a variety of specialty materials to combat extreme pH levels and difficult contaminants.  A full line of stainless models – including a screened inlet design featuring 304 stainless steel or solids-capable units made from 316 stainless steel – are used in a variety of industrial and contaminated waste pumping applications.  Those pumps also include Viton® elastomers and silicon carbide mechanical seals to resist corrosive attack.  Stancor™ also offers a variety of coatings, including Nickel Bronze, to extend service life in high temperatures and demanding environments.

SS_SERIES_PUMPS_LOGO.png
SS-SERIES
Features 316 stainless steel components to manage corrosive contaminants found in wastewater applications.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SSD_SERIES_PUMPS_LOGO.png
SSD-SERIES
Stainless outer casing to provide extra protection in challenging environments.
CLICK HERE FOR MODELS & TECHNICAL INFORMATION
SSS_SERIES_PUMPS_LOGO.png
SSS-SERIES
Stainless steel construction to provide corrosion resistance in challenging environments
 
CLICK HERE FOR MODELS & TECHNICAL INFORMATION.